Models and Specification for 700 Series Automatic Horse Waterers

 Wall Mounted 700 SeriesFree Standing 700 Series
Model730-10C730-10W760-10C760-10W730-10730-24760-10760-24
Housing Material*Aluminum StainlessAluminum StainlessAluminum StainlessAluminum StainlessAluminum StainlessAluminum StainlessAluminum StainlessAluminum Stainless
Width13"13"16"16"13"13"16"16"
Height11"11"11"11"11"25"11"25"
Optional Heater Kit**250 Watt250 Watt325 Watt325 Watt250 Watt250 Watt325 Watt325 Watt
Capacity10-12 Horses10-12 Horses15-18 Horses15-18 Horses10-12 Horses10-12 Horses15-18 Horses15-18 Horses

*Housing Material: Your choice of high strength, 0.105″ thick 304 stainless steel or aircraft grade, 0.125″ thick 6061 aluminum.
**Optional Heater Kit: Fully insulated heater. Mounts on ceramic insulators and does not touch metal or water. 120 VAC, 2-wire with ground connection. Thermostat and water housing insulation included.

Mounting Options

Wall Mounted 700 Series

730-10W & 760-10W

Utility holes in back allow two units mounted in adjacent stalls to share one waterline, reducing cost.

730-10C & 760-10C

Mount in stall corner for maximum protection and efficient use of stall space.

730-10W & 760-10W

Mount on outside wall and bring waterline from heated room through wall and into back of waterer. Installation allows for waterline to be protected from freezing.

Free Standing 700 Series

730-10 & 760-10

Shorter round models are designed to install in standard-sized 12 and 15 inch concrete sewer pipe for an indestructible installation.

730-10 & 760-10

Ten inch tall models mount on concrete pads for shorter animals. Model 760 has a bigger drinking bowl, allowing it to hold more water and can accommodate more horses.

730-24 & 760-24

Large 16′ bowl serves more horses and is well suited for fence line installations and stall partitions.